高性能高压 DC-DC 转换器

斯派曼MCP 模块是一个紧密调节、高性能的直流转直流的转换器， 特点： 浮地3kV 输出、隔离电压为16kV。MCP 低输出纹波规格，使其适合在质谱分析应用中以探测器方式使用，如：电子倍增器(EM)、微通道板探测器(MCP) 和通道电子倍增器。

+3kV @ 330uA 模块是封装在一个屏蔽的金属外壳内。电源带有远程电压编程和电压监测，当以偏置电源方式使用时，其注入纹波低。MCP 模块容易定制，可根据需要提高纹波性能、提高可靠性和可配置的输出引线终端，以满足OEM 需求。

典型应用:

• 质谱分析探测器
• 微通道板探测器
• 电子倍增器
• 通道电子倍增器

规格

^{(Ref. 128027-001 REV. L)}

Input Voltage:

+24Vdc, ±0.5 volts

Input Current:

600 mA maximum

Output Voltage:

+100V to +3kV, continuously variable over the entire output range

Output Current:

330uA maximum

Polarity:

Positive

Isolation Voltage:

Up to 15kV total to ground (resistance to ground 600M on each output)

Line Regulation:

≤ 0.01% for input voltage change of 1V

Load Regulation:

≤ 0.1% for a no load to full load change

Voltage Programming:

0 to 10 volt corresponds to 0 to 100% of rated output voltage

Voltage Monitor:

0 to 5 volts corresponds to 0 to 100% of rated output voltage

Accuracy:

±1% from 10% to 100% of output.

Below 10% accuracy spec is not guaranteed

Ripple:

≤ 0.1% Volts p-p, 0.1Hz to 1MHz

Stability:

≤ 1000 ppm/hour at constant operating conditions after a 1 hour warm up

Temperature Coefficient:

≤ 300ppm per degree C

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

10% to 90%, non-condensing.

Cooling:

Convection cooled

Dimensions:

1.49. H X 4.09. W X 6.73. D (38mm X 104mm X 171mm)

Weight:

2.2 pounds (1kg)

Interface/Power Connector:

9 pin male D connector

High Voltage Output Cable:

HV positive: 29.5” (750mm) fly wire, URM76 coaxial HV cable

HV negative: 29.5” (750mm) fly wire, URM76 coaxial HV cable

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive.2006/95/EC, The Low Voltage Directive.

MCP INTERFACE/POWER CONNECTOR

表和图

DIMENSIONS: in.[mm]

FRONT VIEW

BACK VIEW

TOP VIEW