SpellmanHV ML430 Mass Spectrometry High Voltage Power Supply

ML430

  • 高压镜头电源
  • 双重正/负输出
  • 低成本,紧凑的空气绝缘设计
  • 通过 UL61010-1 认证

*注意:所有规格如有变更,恕不另行通知。有关最新修订,请参阅本数据表的英文 PDF 版本

CE RU 标识

质谱高压电源

斯派曼ML430 电源模块专为驱动高压放大器而设计。此紧凑的、低成本、SMT 基础的高性能模块是印刷电路板安装。其双路输出是放大器驱动需求连同静电透镜、导向器和偏置电源的理想之选。

此电源具有电压调节、电流限制、固定、双路输出等特点,提供高达25mA 的负载电流。ML430 具有全面的电弧和短路条件保护。接地金属外壳提供了屏蔽和散热功能。提供一个启用特性,允许简单的远程操作。ML430 已有CE 和UL 认证。

典型应用:

  • 高压放大器
  • 静电电子透镜

CE RU Marking

规格

(Ref. 128036-001 REV. K)  

Input Voltage:

+24 Vdc, ±1.2Vdc

Input Current:

≤ 1.2 amp

Output Voltage:

Output 1-Positive:

+430 volts fixed. Accuracy ±7%

Output 2-Negative:

-430 volts fixed. Accuracy ±7%

Accuracy specified over full temperature, input voltage and load ranges

Output Current:

12mA maximum – Output 1-Positive

25mA maximum – Output 2-Negative

Line Regulation: (typical)

±0.1% – Positive output

±1.0% – Negative output

Load/Cross Regulation: (typical)

±0.1% – Positive output

±3.5% – Negative output

Output Current Limit:

An auto-recovering short circuit fold back limit is employed.

Fully arc protected, capable of 10 arcs in 5 seconds.

Ripple:

≤ 0.5% p-p of full rated output voltage

Stability:

≤ 0.25% per hour, constant operating conditions after 1 hour warm up

Temperature Coefficient:

≤ 200ppm per degree C

Environmental:

Temperature Range:

Operating: 0°C to 50°C

Storage: -35°C to 85°C

Humidity:

10% to 90% RH, non-condensing

Cooling:

Unit must be mounted in free air, in any position with the exception of inverted (pins up). Forced air cooling is recommended

Dimensions:

0.984. H X 2.362. W X 2.362. D (25mm x 60mm x 60mm)

Weight:

3.31 oz. (94g)

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive.

表和图

DIMENSIONS: in.[mm]

TOP VIEW

ML430 Mass Spectrometry High Voltage Power Supply (Image 2)

FRONT VIEW

ML430 Mass Spectrometry High Voltage Power Supply (Image 3)

SIDE VIEW

ML430 Mass Spectrometry High Voltage Power Supply (Image 4)

 

How to Order:
PART NO.: ML430P/N16/24