MSC2.5PN7.5

  • 专为电子卡盘应用而设计
  • +24Vdc 输入
  • 双极可逆输出
  • 300mS 转换时间驱动 20nF 的负载电容
  • 通过按钮和 LCD 显示屏进行前面板控制
  • RS-232/RS-485 接口

注意:所有规格如有更改,恕不另行通知。请查阅此数据表的英文 PDF版本以获取最新版本。

RoHs Compliant logo

MSC2.5PN7.5 静电卡盘电源

MSC2.5PN7.5 是专为静电卡盘夹持应用而设计的双极可逆电源。两个高压输出连接器上提供了两个 0 到 2500 伏 @ 7.5 瓦可逆输出,极性相反。通过编程按钮和 LCD 显示屏进行的前面板控制允许对设备进行本地操作和控制。RS-232/RS-485/以太网数字接口允许简单的 OEM 集成到复杂的系统设计中。

规格

(Ref. 128027-001 REV. B)

Input:

+24Vdc ±5% @ <2 amps. Switch controlled on front panel and fuse protected.

High Voltage Output 1 and Output 2 Voltage:

0 to ±2500 volts

Current:

0 to 3mA

Power:

7.5 watts, maximum

Polarity:

Bipolar, High Voltage Output 1 polarity always opposite of High Voltage Output 2

Voltage Control:

12 bits of resolution, full scale = 4096 volts, accuracy 1%

Regulation:

Line: <0.1% for 10% input voltage change under any load conditions

Load: <0.1% for zero to full load

Stability:

<0.1%/hour, <0.2%/8 hours at constant operating conditions after 1 hour warm up

Temperature Coefficient:

<50ppm per degree C

Ripple:

<0.1% p-p at full load, maximum output

Rise Time (no load):

All large scale signal changes. 0 to 2500 volts, 2500 volts to 0 will occur in 300 milliseconds or more to within 1% of final value.

Voltage Monitor:

12 bit resolution, full scale = 4096 volts, accuracy with 

Current Monitor:

12 bit resolution, full scale = 5.12mA, accuracy with respect to actual output current is ±2% (±100uA offset)

Typical Load Capacitance:

<20nF

Protection:

Arc and short circuit protected. Equipped with input and output current limits. Output current limit settable from 0.1mA to 3mA.

Not designed to withstand continuous arcing.

Auto-Toggle Function:

This unit has both a manual and a customer configurable automatic toggle function (degauss).

Communication:

The unit can be operated locally from the front panel. It can also be controlled through the RS-232/RS-485 serial interface, or Ethernet. The serial interface can be configured via the front panel to either RS-232 or RS-485. The unit is shipped from the factory set to RS-232. 9600 baud, no parity, no handshake or flow control. Note: When Ethernet is connected to the LAN port, Serial comms is disabled.

Front Panel Indicators:

The unit can be operated locally from the front panel. It can also be controlled through the RS-232/RS-485 serial interface,
or Ethernet. The serial interface can be configured via the front panel to either RS-232 or RS-485. The unit is shipped from the factory set to RS-232. 9600 baud, no parity, no handshake or flow control. Note: When Ethernet is connected to the LAN port, Serial comms is disabled.

Front Panel Controls:

The unit has front panel buttons for local control.

Local

The unit has front panel buttons for local control.

Toggle

Manual change of output polarity

Output On/Off

Soft turns the high voltage output on and off

Mode

Changes the mode of operation and navigation menu

Rotary Control/Enter

For navigating and entering value changes

Environmental:

Temperature Range:

Operating: 0˚C to 45˚C

Storage: -35˚C to 85˚C

Humidity:

0 to 85% RH, non-condensing

Input Power Connector:

2 pin Molex VersaBlade connector 

Serial Communications Connector:

9 pin female D connector 

High Voltage Output Connectors:

Radiall BNC-HT/MHV connector 

Cooling:

Convection cooled

Dimensions:

12.45˝ L x 8.03˝ W x 3.46˝ D (316mm x 204mm x 88mm)

Weight:

3.09lbs. (1.4kg)

Regulatory Approvals:

Designed to meet IEC/UL 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use; CAN/CSA-C22.2 No.61010-1. CE marked to EN 61010-1. RoHS compliant. As the unit is designed for incorporation within the users system it is not tested against any specific EMC standards. The user will need to take sensible EMC precautions when designing the unit in and verify the overall system EMC performance against any relevant standards.

 

INPUT POWER — MOLEX VERSABLADE 2 PIN CONNECTOR

PIN SIGNAL PARAMETER
1 +24Vdc +24Vdc @ 2A
2 +24Vdc Return (Gnd.) Power Ground

SERIAL COMMUNICATIONS — 9 PIN FEMALE D CONNECTOR

PIN SIGNAL I/O  SIGNAL PARAMETERS
1 NC -  Connection
2 Z/TXD I/O TXD RS-232/RS-485 Inverting 
3 Y/RXD I/O RXD RS-232/RS-485 Non Inverting 
4 NC - No Connection 
5 GND - Ground 
6 NC - Connection 
7 NC - Connection 
8 NC - Connection 
9 NC - Connection 

 

How To Order:
MSC2.5PN7.5

表和图

DIMENSIONS: in.[mm]

REAR VIEW

 MSC2.5PN7.5 Rear View   

TOP VIEW

FRONT VIEW

MSC2.5PN7.5 Front View