PDM 系列 Monoblock® 全景牙科X射线发生器

集成了灯丝、灯管和电子束端口的 X 射线源
独立控制式电子箱
紧凑，轻便
模拟或数字控制接口

*注意：所有规格如有变更，恕不另行通知。有关最新修订，请参阅本数据表的英文 PDF 版本。

全景牙科 X 射线源

斯派曼全景牙科 Monoblock® 包括集成的 X 射线管、双输出高压电源和带控制电路的灯丝电源。PDM90PN900 是设计用于口腔牙科 X 射线应用，包含：CT 和全景 X 射线。产品具有：小的外观尺寸、标准的模拟接口和 RS-232 数字接口等特点，使得此 Monoblock® 能更简单集成到您的 X 射线系统中。专有的发射控制电路提供了卓越的 X 射线管电流管理，同时具有出色的稳定性和性能。

典型应用:

牙科X 射线：全景和Ct 影像

规格

^{(Ref. 128109-001 REV. D)}

X-Ray Tube Characteristics:

Target Angle: 5 degrees

Focal Spot: 0.5mm nominal

Beam Filtration: 3.0mm of Al equivalent

Beam Geometry: see page 3

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 50kV to 90kV

Voltage Regulation:

Line: ±0.5% for a ±1V change of nominal input line voltage

Load: ±0.1% for a load change of 25µA to maximum rated current

X-Ray Tube Current:

1mA to 10mA over specified tube voltage range

Current Regulation:

Line: ±0.5% for a ±1V change of nominal input line voltage

Load: ±0.5% for a voltage change of 35kV to 80kV

X-Ray Tube Power:

900 watts peak power

Duty Cycle:

CT (Pulsed): ≤ 45 seconds scan time cycle at up to 40 pulses per second available

Panoramic (Continuous): Maximum scan time = 30s, with 60s off-time. Five consecutive scans

Input Voltage:

100-240Vac ±10% 50/60 Hz, 10 amps RMS maximum

Interface:

The RS-232 serial communications interface will be used to program and monitor output voltage and current, control various functions and report status and faults.

Digital Interface Connector:

RS-232: 9 pin D connector, male

Operating Temperature:

0°C to +40°C

Storage Temperature:

-20°C to +70°C

Humidity:

5% to 95% relative humidity, non-condensing

Cooling:

Tank: Convection

Controller: Forced air via provided fan

Dimensions:

X-Ray Tank: 9.7"W X 7.7"H X 4.7"D (247mm X 195mm X 119mm)

Inverter/Controller: 7.10"W X 9.80"H X 3.60"D (180mm X 250mm X 92mm)

Weight:

X-Ray Tank: 17lbs (7.7kg)

Inverter/Controller: 6.5lbs (3kg)

X-Ray Leakage:

Less than 100mR/hour (or <1mGy/hr) @ 1meter from the Monoblock® surface.

Regulatory Approvals:

Compliant to EMC 60601-1-2 (external EMC filter and shielding required). UL/CUL recognized file E242584.

Pin	Signal	Parameters
1	X-Ray Ready/Sync	+5 V Logic
2	X-Ray Enable	+5 V Logic
3	+ X-ray Signal (Exgate)	+5VDC = Enable X-Ray, Low (or Open) = Disable X-Ray
4	Signal Ground	Signal Ground
5	VMTR Signal (KV monitor)	Voltage: 0 to +5.00 V max, Scale Factor: 0 – 5.00 Vdc = 0 to 100 kV
6	Signal Ground	Signal Ground
7	IMTR Signal (mA monitor)	Voltage: 0 to +5.00 V max, Scale Factor: 0 – 5.00 Vdc = 0 – 12.1mA
8	Fault Signal	Output signal: Open Collector, High (Open) = No Fault
9	HV ON Lamp, Relay N/O	Relay Normally Open, Dry contacts rated 1A or less will handle a nominal 50mA DC load.
10	HV ON Lamp, Common	Common

RS-232 DIGITAL INTERFACE— J5 9 PIN MALE D CONNECTOR

Pin	Signal	Parameters
1	N/C	No Connection
2	TX	Transmit Data
3	RX In	Receive Data
4	N/C	No Connection
5	SGND	Signal Ground
6	N/C	No Connection
7	N/C	No Connection
8	N/C	No Connection
9	N/C	No Connection

LED INDICATORS

Indicator	Signal Name	Condition Illuminated When...
LED 1	OV	High kV occurs
LED 2	UV	Low kV occurs
LED 3	UC	Low mA occurs
LED 4	OC	High mA occurs
LED 5	ARC FLT	Arc fault occurs
LED 6	OT	Over temperature occurs
LED 7	PW (Pulse mode)	Pulse mode selected
LED 8	CW (CW mode)	CW mode selected
LED 9	CW (CW mode)	X-Ray is ON