
60W 高压电源
斯派曼SMS 系列60W 高压电源是基于一个专有谐振回扫功率转换拓扑技术,其效率超过80%。固定极性的模块(在订购时指定正极性或负极性) 特点:自动切换电压和电流调节,使其适合敏感负载应用。SMS 系列连同电弧和短路保护的强健设计,允许在极其苛刻的环境下工作。
典型应用:
- 静电纺丝
- 高压绝缘试验测试
- 探测器阵列
- 电泳
- 电缆测试
规格
(Ref. 128015-001 REV. P)
Input:
+24Vdc ±10% @ 4.0A
Output:
10 models from 1kV to 60kV. Positive or negative polarity outputs.
Efficiency:
80 to 85%, typical
Voltage Regulation:
Load: 0.01% of output voltage no load to full load.
Line: ±0.01% for ±10% change in input voltage.
Current Regulation:
Load: 0.1% of output current from 0 to rated voltage.
Line: 0.05% of rated current over specified input range.
Stability:
0.02% per 8 hours.
Temperature Coefficient:
0.01% per °C, voltage or current regulated.
Ripple:
0.1% p-p of maximum output voltage.
Environmental:
Temperature Range:
Operating: 0°C to 40°C
Storage: -40°C to 85°C
Humidity:
0 to 90%, non-condensing
Dimensions:
3.H x 5.W x 9.D (7.6cm x 12.7cm x 23.0cm).
Weight:
5.25 pounds (2.38kg)
Input Connector:
12 pin AMP Metri-Mate (mating connecter and pins provided)
Output Cable:
18.±1. (45.7cm) of UL® approved high voltage wire
Front Panel Ground Connection:
Threaded 8-32 ground stud, nut provided
Regulatory Approvals:
CCompliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. RoHS Compliant.
SMS SELECTION TABLE
Maximum Rating | Model Number | |
---|---|---|
kV | mA | |
1 | 60 | SMS 1*60 |
3 | 20 | SMS 3*60 |
5 | 12 | SMS 5*60 |
10 | 6 | SMS 10*60 |
15 | 4 | SMS 15*60 |
20 | 3 | SMS 20*60 |
30 | 2 | SMS 30*60 |
40 | 1.5 | SMS 40*60 |
50 | 1.2 | SMS 50*60 |
60 | 1.0 | SMS 60*60 |
*Specify “P” for positive polarity or “N” for negative polarity.
CONNECTOR 12 PIN
Pin | Signal | Parameters |
---|---|---|
1 | Power Ground | +24Vdc Return |
2 | +24Vdc Input | +24Vdc @ 3.5 amps, maximum |
3 | High Voltage Enable/Inhibit | Open = HV OFF, Ground = HV ON |
4 | Voltage Test Point | 0 to 10Vdc = 0 to 100% of rated output |
5 | Current Test Point | 0 to 10Vdc = 0 to 100% of rated output |
6 | Voltage Programming | 0 to 10Vdc = 0 to 100% of rated output |
7 | Current Programming | 0 to 10Vdc = 0 to 100% of rated outp |
8 | +10Vdc Reference | +10Vdc @ 1mA maximum |
9 | Signal Ground | Signal Ground |
10 | Spare | No Connection |
11 | Spare | No Connection |
12 | Spare | No Connection |
表和图
DIMENSIONS: in.[mm]
SIDE VIEW
TOP VIEW
BACK VIEW
Frequently Asked Questions
What Is a Safe Level of High Voltage?
Where Can I Obtain Information on High Voltage Safety Practices?
What Kind of High Voltage Connector Do You Use on Your Supplies?
What Do You Mean That the Output Side of the High Voltage Cable on Most Standard Products Is “Unterminated”?
How Should I Ground Your Supply?
Why Is Arcing an Issue for a High Voltage Power Supply?