SPX 系列

恒定电位输出
高度稳定，合理调节
功率因数校正交流输入电路
数字接口、以太网和 RS-232
末端接地的暴露阳极
便携，可重复，准确
100％工作周期
无与伦比的分辨率成像
液冷或风冷型号
穿透高达 76mm 的 Fe（300kV 装置）

*注意：所有规格如有变更，恕不另行通知。有关最新修订，请参阅本数据表的英文 PDF 版本。

160kV、200kV、300kV 便携式工业级 NDT X 射线成像系统

Spellman SPX 系列非常适合当今严苛的 NDT 检测要求。SPX 装置坚固耐用，易于运输，经济实惠。它们可以是线路或便携式发电机，能自动发电以适应标准输入电压，几乎在任何地方的极端条件下都能进行全天检查。

末端接地的 X 射线管的焦斑尺寸为 1.5 平方毫米，利用露出的阳极能方便灵活地定位管头组件。管端口使用吸收作用较低的铍窗口，有助于放射线技师利用全谱 X 射线能量。在 SPX 系统的高辐射输出下，可以降低每次曝光的 kV，缩短曝光时间，提高胶片对比度，从而实现卓越的放射线成像。

SPX

SPX 控制装置由微处理器驱动，它提供自动预热和全面的自我诊断电路。用于存储和调用曝光技术的存储器是标准存储器，断电前会保留最后一组曝光参数。SPX 可以 1kV 和 0.1mA 的增量进行调节。曝光持续时间可以设置为 1 秒至 99分59 秒，增量为 1 秒。有三种型号可供选择：160kV、200kV 和 300kV。

典型应用：

航天
制造
国防
航空
能源
安保系统
NDT 应用

选配件

用于 SPX 的 GUI 控制软件

GUI 专为控制 SPX 系列系统而设计。作为前面板控制的替代，GUI 支持用户从基于 Windows 的便捷菜单控制系统的所有必要功能。此外，在通过前面板控制系统时，GUI 可作为一种诊断工具使用。

自动预热 X 射线管
定时或连续曝光模式
故障和状态监测

激光指示器

Spellman 独有的激光指示器可以精确定位图像区域。激光指示器将高度可见的基准激光束从管头投射到最远 75 英尺开外的表面，精确显示中心 X 射线束的位置，提供无与伦比的准确度，从而提高效率并缩短设置时间。

管头支架

利用 X 射线管头支架（选配件）可快速进行设置，并通过管头组件的三轴定位提供刚性支撑，以获得最佳图像质量。支架整合了伸缩腿、手轮驱动的可变高度调节装置以及用于控制管头倾斜和水平旋转的可锁式手轮。管头护架有缓冲垫，可确保稳固安装和减振。其中所含的气泡型指示器有助于快速方便地校平管头。黑色阳极氧化铝结构。重约 35 磅（16 公斤）。

SPX 系列

风冷管头组件

风冷管头组件使用散热片和高容量风扇来驱散阳极释放的热量，通常用于接近时不受限制的应用中，不在挥发性燃料蒸气环境中使用。风冷管头组件无需冷却器装置，也无需进行与液体冷却剂相关的混合和维护。该装置需要进行的用户维护较少，因此可以认为它更环保。

SPX 系列

全景管头组件

全景管头组件仅提供液冷型号，它可以产生 360 度锥形辐射，非常适合用于飞机 FOD 检查、油箱或管道检查，或用于任何需要进行圆周放射检查的应用。

SPX 系列

规格

^{(Ref. 128121-001 REV. F)}

Input Line Requirements:

Automatically adapts to input line voltage
200-250Vac, 50/60Hz, 10 Amperes maximum
May also be portable-generator powered

X-Ray Output

SPX160: 0.7mm x 1.0mm (0.03in x 0.04in) EN12543
0.5mm x 0.5mm (0.02in x 0.02in) nominal IEC60336
This tube has a flat target (0 degree) and therefore it is without dimension along the tube axis (other than panoramic tubes with conical targets). The true focal spot on the target can only be estimated by taking two focal spot film exposures in the main beam 90 degrees apart from each other. Due to this no focal spot is inferred.

X-Ray Tube Window:

SPX160: Beryllium 0.8mm (directional)
Nickel 0.6mm (panoramic)
SPX200: Beryllium 1.0mm
SPX300: Beryllium 1.0mm

Radiation Coverage:

SPX160: 40° directional or 360° panoramic tube available
SPX200: 40° directional or 360° panoramic tube available
SPX300: 40° x 60°

Radiation Output:

SPX160: 14R/min at 50cm filtered with 0.5 inches (12.7mm)
aluminum at 160kV, 5mA
SPX200: 21R/min at 50cm filtered with 0.5 inches (12.7mm)
aluminum at 200kV, 4.5mA
SPX300: 30R/min at 50cm filtered with 0.5 inches (12.7mm)
aluminum at 300kV, 3mA

Radiation Leakage:

Less than 2.0 Roentgens per hour at 1 meter from
the X-Ray tube target.

Effective Focal Spot:

SPX160:

Standard: 0.03 x 0.04 in. (0.7 x 1.0mm) EN12543
0.02 in. sq. (0.5mm sq.) IEC60336

Panoramic: This tube has a flat target (0 degree) and therefore it is without dimension along the tube axis (other than panoramic tubes with conical targets). The true focal spot on the target can only be estimated by taking two focal spot film exposures in the main beam 90 degrees apart from each other. Due to this no focal spot is inferred.

SPX200:

Standard: 3mm x 3mm (0.12in x 0.12in) EN12543
0.060 in. sq. (1.5mm sq.) IEC60336

Panoramic: 0.4mm x 4mm (0.016in x 0.16in) EN12543

SPX300:

Standard: 3mm x 3mm (0.12in x 0.12in) EN12543

Ambient Temp:

100% duty cycle @ 120°F (49°C)

Duty Cycle:

100% - liquid or air cooled

Storage Temp:

-30°F to 160°F (-35°C to 71°C)

Anode Cooling:

Liquid coolant solution closed loop between X-Ray tube anode and cooling unit, or fan forced air cooling.

Liquid Cooling Unit Dimensions:

Please reference dimension drawings

Liquid Cooling Unit Weight:

54lbs. (15.4kg) approx.

Tube Head Dimensions:

Please reference dimension drawings

Tube Head Weight:

SPX160:

Liquid Cooled: 29lbs. (13.15kg)

Air Cooled: 33lbs. (14.97kg)

Panoramic: 29lbs. (13.15kg)

SPX200:

Liquid Cooled: 37lbs. (16.78kg)

Air Cooled: 41lbs. (18.60kg)

Panoramic: 37lbs. (16.78kg)

SPX300:

Liquid Cooled: 98lbs. (44.5kg)

Air Cooled: 105lbs. (47.61kg)

X-Ray Control Unit:

Digital microcomputer based with local control, RS-232 and Ethernet

X-Ray Control Unit Dimensions:

Please reference dimension drawings

X-Ray Control Unit Weight:

26lbs. (11.8kg) approx.

Safety Devices:

Tubehead Pressure Relief Valve
Tubehead Thermal Cut-Out
Tubehead Pressure Gauge
Tubehead Low Pressure Cut-Out @ 25psi (1.72 Bar)
Coolant Flow Sensor (liquid cooled only)
Control Unit Safety Keyswitch
Microcomputer-based Self Diagnostics
Continuous Exposure Parameter Display

Standard Accessories:

Operation manual
Tubehead carrying case
Tubehead Pressure Gauge
Tubehead Cable- 100’ with strain relief
Extra key (1) for Control Unit Safety Lock
Power cable - 25’ with strain relief
Coolant hose - twin, 50’ with self-sealing terminations (liquid cooled only)
Cooler power cable

SPX160 MODEL SELECTION TABLE

Model Number	Description
SPX160ACDBG	Air Cooled, 40° Directional Beam, Glass insert
SPX160LCDBG	Liquid Cooled, 40° Directional Beam, Glass insert
SPX160LCPANG	Liquid Cooled, PANoramic Beam, Glass insert

SPX200 MODEL SELECTION TABLE

Model Number	Description
SPX200ACDBC	Air Cooled, 40° Directional Beam, metal Ceramic insert
SPX200LCDBG	Liquid Cooled, 40° Directional Beam, Glass insert
SPX200ACDBG	Air Cooled, 40° Directional Beam, Glass insert
SPX200PANC	Liquid Cooled, PANoramic beam, metal Ceramic insert
SPX200LCDBC	Liquid Cooled, 40° Directional Beam, metal Ceramic insert

SPX300 MODEL SELECTION TABLE

Model Number	Description
SPX300LCDBC	Liquid Cooled, 40° Directional Beam, metal Ceramic insert
SPX300ACDBC	Air Cooled, 40° Directional Beam, metal Ceramic insert

SPX OPTIONS

Model Number	Description
3-000-0754	SPX160/200 tubehead stand
3-000-0756	SPX300 tubehead stand
3-000-0792	Laser pointer for liquid cooled tube
K935	SPX160 Laser pointer for air cooled tube
K936	SPX200 Laser pointer for air cooled tube
K937	SPX200/300 Laser pointer for liquid cooled tube
K938	SPX300 Laser pointer for liquid cooled tube

SPX MAIN AC INPUT
Controller Side; Male, 3 pins MS type

PIN	SIGNAL
A	LINE 1 120/220Vac
B	LINE 2 Neutral 120/220Vac
C	Ground

SPX INTERLOCK CONNECTOR
Controller Side; Female, 8 pins MS type
Tube Side; Male, 8 pins MS type

PIN	SIGNAL
A	External Interlock
B	External Interlock
C	X-Ray ON External Light
D	External Lights Returns (GND)
E	Pre-Warning External Light
F	External Light Confirm
G	24Vac Outut, 1A max.
H	H 24Vdc Return (com.)

SPX FAN CONNECTOR (A/C ONLY)
Controller Side; Female, 8 pins MS type
Tube Side; Male, 4 pins MS type

PIN (Control)	PIN (Tube Head)	SIGNAL
D	A	Fan 120Vac Line1
C	B	Fan 120Vac Tap
G	C	Fan 120Vac Line2/Neutral
B	D	Ground
E		N/C
F		N/C
A		Flow Interlock
H		Flow Interlock

SPX INTERLOCK CONNECTOR (W/C ONLY)
Controller Side; Female, 8 pins MS type
Tube Side; Male, 8 pins MS type

PIN	SIGNAL
A	Flow Interlock
B	Ground
C	120/220Vac Line1 for Motor
D	120/220Vac Line2/Neutral for Motor
E	120Vac Motor Tap
F	120/220Vac Motor Tap
G	220Vac Motor Tap
H	Flow Interlock

SPX160 TUBE HEAD CONNECTOR
Controller Side; Female, 10 pins MS type
Tube Side; Male, 10 pins MS type

PIN	SIGNAL
A	Interlock Temperature /pressure
B	Ground
C	Ground
D	HV Transformer
E	mA Feedback
F	Filament Transformer
G	kV Feedback
H	kV Feedback Return (GND)
I	Filament Transformer
J	HV Transformer

SPX200/300 TUBE HEAD CONNECTOR
Controller Side; Female, 14 pins MS type
Tube Side; Male, 14 pins MS type

PIN	SIGNAL
A	Interlock Temperature/Pressure SPX200, N/C SPX300
B	Ground
C	Ground
D	HV Transformer
E	mA Feedback
F	Filament Transformer
G	kV Feedback
H	kV Feedback Return (GND)
I	Filament Transformer
J	HV Transformer
K	N/C
L	Interlock Temperature/Pressure SPX300, N/C SPX200
M	N/C
N	N/C