XRB160PN192 Monoblock® 工业X射线发生器

集成高压电源，灯丝电源，X 射线管，电子束端口和控制电子设备
紧凑，轻便
通用输入，功率因数校正
可以安装在任何物理方向
模拟监控和标准 RS-232 数字接口

*注意：所有规格如有变更，恕不另行通知。有关最新修订，请参阅本数据表的英文 PDF 版本。

160kV，200W X 射线源

斯派曼 XRB160PN192 系列 Monoblock® X 射线源是专为 OEM 应用而设计。输出电压为 160kV，功率为 200W，为内部的 X 射线管供电。产品具有通用的电源输入、小的外观尺寸、标准的模拟接口和 RS-232 数字接口等特点，使得此 Monoblock® 能更简单集成到您的 X 射线系统中。标准的型号是扇形的射线束。专有的发射控制电路提供了卓越的 X 射线管电流管理，同时具有出色的稳定性能。

典型应用:

X 射线扫描：食品检验、液位确认和安检应用

规格

^{(Ref. 128082-001 REV. L)}

X-Ray Characteristics:

Tube Type: Glass tube, Tungsten target, Be filter

Focal Spot: 0.8mm x 0.8mm.

Beam Filter: 0.016. thick 6061 Al.

Beam Geometry: Asymmetrical fan 80° x 10° +/-2°

Input Voltage:

100-240Vac, 50/60Hz, 5A maximum +/-10%

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 80kV to 160kV

X-Ray Tube Current:

0.1mA to 1.2mA, 192W maximum over specified tube voltage range

X-Ray Tube Power:

192W, maximum continuous

Voltage Regulation:

Line: ±0.1% for a ±10% input line change of nominal input line voltage Load: ±0.1% for a 0.1mA to 1.2mA load change

Voltage Accuracy:

Voltage measured across the X-Ray tube is within ±2% of the programmed value

Voltage Risetime:

Ramp time shall be <200ms from 10% to 90% of rated output

Voltage Overshoot:

Within 5% of rated voltage in <10ms

Voltage Ripple:

1% p p of rated voltage @ =1kHz

Current Regulation:

Line: ±0.1% for a ±10% input line change of nominal input line voltage

Load: 0.5% @ 80-160kV, 0.1mA to 1.2mA

Current Accuracy:

Current measured through the X-Ray tube is within ±2% of the programmed value

Current Risetime:

<200ms from 10% to 90% of rated output

Arc Intervention:

4 arcs in 10 seconds with a 200ms quench = Shutdown

Filament Configuration:

Internal high frequency AC filament drive with closed loop filament emission control

Analog Interface:

0 to 10Vdc ground referenced signals

Digital Interface:

RS-232 interface.

Control Software:

A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.

Interlock Signals:

A hardware interlock function is provided

Operating Temperature:

0°C to +40°C

Storage Temperature:

-40°C to +70°C

Humidity:

10% to 95% relative humidity, non-condensing

Cooling:

Natural convection augmented by customer provided 250cfm cooling fans for 200W operation

Input Line Connector:

6 pin Molex 26-60-4060

Analog Interface Connector:

7 pin Molex 26-60-5070

Digital Interface Connector:

9 pin D connector, female

Grounding Point:

32 ground stud provided on chassis

Dimensions:

18" X 13.5" X 7.63" (458mm X 343mm X 193.80mm)

Weight:

90lbs (40.5kg)

Orientation:

Can be mounted in any orientation.

X-Ray Leakage:

Not to be greater than 0.5mR/hr at 5cm outside the external surface.

Regulatory Approvals:

Compliant to EEC EMC Directive (External EMC filter required). Compliant to EEC Low Voltage Directive. UL/CUL recognized file E235530.

AC INPUT POWER J1 6 PIN CONNECTOR

Pin	Signal	Parameters
1	Line	Line
2	Removed	N/C
3	Neutral	Neutral
4	Removed	N/C
5	Spare	N/C
6	Spare	N/C

RS-232 DIGITAL INTERFACE— JB16 9 PIN FEMALE D CONNECTOR

Pin	Signal	Parameters
1	N/C	No Connection
2	TD	Transmit Data
3	RD	Receive Data
4	N/C	No Connection
5	SGND	Signal Ground
6	N/C	No Connection
7	N/C	No Connection
8	N/C	No Connection
9	N/C	No Connection

ANALOG INTERFACE— J7 7 PIN MOLEX CONNECTOR

Pin	Signal	Parameters
1	Ex Gate	Low = X-Ray OFF, +12Vdc = X-Ray ON
2	Signal Ground	Ground
3	N/C	No Connection
4	kV Monitor	0-9 Vdc = 0 to 100% rated output
5	Signal Ground	Ground
6	mA Monitor	0 to 9Vdc = 0 to 100% rated output
7	Fault	Open collector, 35V @ 10mA max, High = No Fault

LED INDICATORS

Indicator	Signal Name	Condition Illuminated When...
LED 1	OV	High kV occurs
LED 2	UV	Low kV occurs
LED 3	UC	Low mA occurs
LED 4	OC	High mA occurs
LED 5	ARC FLT	Arc fault occurs
LED 6	OT	Over temperature occurs
LED 7	X-RAY ON	X-Rays are enabled
LED 8	PWR	Power is ON